First of all, it is important to ensure that the environment in which the magnet is stored during transport is dry. If the humidity is relatively high, it is easy to cause the magnet rust. You can also use some rust-resistant oil to apply to the magnet surface, which is a good way to prevent magnet rust. For magnets with electroplating layers, vacuum transport should be used to prevent corrosion of the plating layer.
|Type of coating:|
Ningbo Bestway Magnet Co.,Ltd specializes in researching, manufacturing, developing and selling rare earth neodymium magnets, sintered neodymium radiation ring magnets and magnetic assemblies that our annual output of magnets more than 300 tons.
Covering an area of 40,700 square meter modern standard factory, our company is fully implementing lean shop floor management and we have passed IATF-16949:2016 and a variety of relevant system certification. Technicians and management team members in our company all have many years of neodymium magnets industrial experience, while we also have set up enterprise and postdoctoral workstation. In 2013, we built an R&D center called “Low Dysprosium and High Coercivity Sintered Neodymium Magnets”.
Our products are widely applied to many fields such as permanent magnet motors, electric trolleys, elevator tractors, magnetic resonance imaging, voice coil motors, electro-acoustic devices, sensors, wind turbines, magnetic separators, IT, power tools, etc.
Compared with conventional electric motors, industrial permanent magnet motors have the advantage of high energy-efficient, simple design, miniaturized products.
Servo motor magnets: 35SH, 38SH, 42SH, 28UH, 30UH, 33UH, 35UH, 38UH, 33EH, 35EH, 38EH.
Linear motor magnets: 38M, 42H, 48H.
Joint driving motor magnets of robots: 44H, 42SH, 44SH, 38UH.
The machine tool motor magnets: 42SH.
Other motor magnets: 35H, 40H, 35SH, 42SH and so on